Airfield Lighting Systems UK Limited
Aviation House, Russell Gardens, Wickford
Essex SS11 8BF Tel +44 1702 547866
www.alsukltd.co.uk
1.3. Introduction to safety
WARNING
This equipment may contain electrostatic devices and hazardous voltages.
•
Read installation instructions in their entirety before starting installation.
•
Become familiar with the general safety instructions in this section of the manual
before installing, operating, maintaining or repairing this equipment.
•
Make this manual available to personnel installing, operating, maintaining or
repairing this equipment.
•
Follow all applicable safety procedures required by your company, industry
standards and government or other regulatory agencies.
•
Install all electrical connections to local code.
•
Use only electrical wire of sufficient gauge and insulation to handle the rated
current demand. All wiring must meet local codes.
•
Protect components from damage, wear, and harsh environment conditions.
•
Protect equipment with safety devices as specified by applicable safety
regulations
•
If safety devices must be removed for installation, install them immediately after
the work is completed and check them for proper functioning prior to returning power
to the circuit.
•
Never touch exposed electrical connections on equipment while the power is
ON.
Failure to follow this instruction can result in serious injury or equipment damage
Electric Shock Hazard
