
ALPINE HCE-C500 EN 68-18693Z84-A (A5)
18
-EN
Connections
FRONT CAMERA OUT
ILLM
ACC
BATT
REVERSE
VIDEO OUTPUT
FRONT
REAR
RIGHT
LEFT
REAR CAMERA OUT
CAMERA CONTROL
(Grey)
(Green)
(Violet)
(White)
(Yellow)
(Yellow)
(Blue)
(Orange/Black)
(Orange)
(Red)
(Yellow)
(Black)
(Orange/White)
Fuse (7.5A)
SETUP switch (ON/OFF)
This switch is used by your ALPINE dealer when calibrating
this system.
It is normally set to “OFF”. If you accidentally set it to “ON”,
the system may need to be recalibrated.
Front Camera Input Connector
Rear Camera Input Connector
Side Camera Input Connector (Right)
Side Camera Input Connector (Left)
Video Output Connector
Rear Camera Output Connector
Currently not used
Front Camera Output Connector
Currently not used
Camera Control Lead
Currently not used
Illumination Lead
Currently not used
Switched Power Lead (Ignition)
Battery Lead
Connect this lead to the positive (+) post of the
vehicle’s battery.
Ground Lead
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Reverse Input Lead
Switch Connector
Camera cable (for side camera)
Camera cable (for front/rear camera)
Power cable
Sys
*