Alpine NVD-V001 SMART MAP PRO, Owner'S Manual

Page: 12 / 53

12
Before Using The System
1-1
After you have read this important
information, press the ENTER
button.
The map screen is displayed.
2
With the map displayed, press the
OFF button on the remote control
to turn off the display monitor.
If you press the POWER button, the
opening screen is displayed.
3
a
If there is no disc in the
navigation system, "Please
insert map DVD ROM" is
displayed. For details on
how to load the disc, refer to
the "Inserting a disc" and
"Removing a disc" sections
on the manual for the
navigation system.
a If the inserted disc cannot be
read, the "DVD ROM unread-
able. Please check DVD
ROM" message is displayed.
Load the correct disc.
a If for an extended period of
time the monitor is kept on
with the engine off, the
battery may discharge.
Tips
Switching the display
on/off
With the Alpine navigation system, when the
ignition key is turned to ACC or ON and the
display monitor is set in the navigation display
mode or external input display mode, the
opening screen will be automatically displayed.
For operation of the remote control, see page 50 and
the Owner's Manual for your system.
When the system is used for
the first time, the language
selection menu is displayed.
Select (highlight) the desired
language by tilting the joystick.
Then press the ENTER button.
(For details, see the "Setting
language mode" section.)
Note: For English, you can select the
distance indications in either M
(Mile) or km (Kilometre). For other
languages, only kilometre is used
for the distance indications.
1-2
The opening screen is
displayed. After the opening
screen is displayed, important
information saying "Please be
sure to read this!" is displayed.
Be sure to read it.