24
-EN
An external device (such as a portable music player) can be connected
to the Bluetooth interface connector of this unit. A special Conversion
cable (KCE-237B) is necessary to adapt the Bluetooth interface
connector as an AUX IN.
Setting item: AUX+ IN
Setting contents: OFF / ON
•
When OFF is selected, the settings related to AUX
+
cannot be
changed from this unit.
•
Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ Level
Setting contents: LOW / HIGH
MultiInfo Setup Operation
1
Press and hold
SETUP
of the unit for at least 2
seconds.
The SETUP selection screen is displayed.
2
Touch
[
]
of MultiInfo Setup.
The MULTI INFO SETUP screen appears.
•
While in Multi Info mode, you can also recall MULTI INFO SETUP
screen directly by pressing
SETUP
.
Display example for MULTI INFO SETUP screen
Displays the MultiInfo item selection list.
Displays the selected MultiInfo item. (If no item is
selected, the default items will be displayed.)
3
Touch
[
]
or
[
]
until the desired item is displayed
in the
list.
Setting items:
Clock / Calendar / Calculator / AV Info / AV Cont / Sound Cont. /
IMPRINT
*
* You can set this item only when an IMPRINT audio processor
(PXA-H100) is connected.
4
Touch the desired item.
(e.g. touch
[Calendar]
)
5
Touch a present item in
that you want to replace.
(e.g.
[AV Cont]
)
The newly-selected item will replace the present one and is
displayed in Multi Information main screen.
(e.g. AV Controller will be replaced as Calendar)
6
Touch
[
]
to return to the previous screen.
Touch and hold
[
]
for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
•
For detailed content and operations of the selected MultiInfo item,
refer to “Multi Information Function” on page 15.
•
The selected item in the
list is shown as ineffective (inoperative)
status.
•
You can drag item in the
directly to change the display position of
the 4 small screens.
Setting the AUX+ Mode
OFF:
AUX+ source is not displayed.
ON:
AUX+ source is displayed.
Adjusting the AUX+ Audio Level
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
MultiInfo Setup
The Parking Brake must be engaged to access the MultiInfo
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 6 are common operations to each
“Setting item” of MultiInfo Setup. Refer to each section for
details.
A
B
A
B
A
B
