63
-EN
An iPod
®
can be connected to this unit.
iPod connection can be made in two ways using the USB connection
cable, or directly connecting the iPod using the FULL SPEED™
connection cable (KCE-422i).
When the IVA-W505R/IVA-W502R is connected by using the cable,
the controls on the iPod are not functional.
•
Only 5th generation iPod, the first generation iPod nano and
the second generation iPod nano can be connected via a
USB device.
•
Set AUX+ to OFF when an iPod is connected via the FULL
SPEED™ connection cable (refer to “Setting the AUX+
Mode” on page 41).
•
If the Bluetooth Box and an iPod are connected at the same
time, be sure to disconnect the iPod from the Bluetooth Box
while turning ACC to OFF.
•
To watch the video screen of the file in the Video iPod (fifth
generation iPod), using the USB connection and the Parking
Brake must be engaged.
•
For automatic transmission vehicles, place the transmission lever in
the Park position.
About iPods usable with this unit
•
The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or the first, second generation
iPod nano only. However, future generation iPod compatibility
cannot be guaranteed.
<USB connected>
Fifth generation iPod
First generation iPod nano
Second generation iPod nano
<Directly connected>
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
•
If the unit is used with iPod software versions of iTunes earlier
than 7.1.0.59, correct function and performance are not
guaranteed.
Playback
1
Touch
[SOURCE]
on the main source screen.
The SOURCE selection screen is displayed.
2
Touch
[iPod]
*
1
or
[iPod-2]
*
2
.
The display shows the iPod or iPod-2 mode screen.
*
1
Only when the iPod is connected by using the USB connector.
*
2
Only when the iPod is connected by using the iPod direct connector.
3
Touch
[
]
or
[
]
to select the desired song.
Return to the beginning of the current song:
Touch
[
]
.
Fast backward the current song:
Touch and hold
[
]
.
Advance to the beginning of the next song:
Touch
[
]
.
Fast forward the current song:
Touch and hold
[
]
.
4
To pause playback, touch
[
/
]
.
Touching
[
/
]
again will resume playback.
•
If a song is playing on the iPod when it is connected to the
IVA-W505R/IVA-W502R, it will continue playing after the
connection.
•
If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing
EPISODE
[
] or [
].
•
An episode may have several chapters. The chapter can be changed
by pressing [
] or [
].
•
Display mode can be changed by touching
[WIDE]
when an iPod
compatible video is connected by using USB connector. For details,
refer to “Switching Display Modes” (page 29).
•
If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-W505R/IVA-W502R. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
•
Some characters may not be correctly displayed.
•
“NO SUPPORT” is displayed when text information is not
compatible with the IVA-W505R/IVA-W502R.
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the IVA-W505R/IVA-W502R can use these to
ease song searches.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
<MUSIC Search Menu>
•
Video search mode depends on the iPod. If the specification of the
iPod is changed, the search mode on this unit will also be changed.
iPod
®
(Optional)
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlist
Song
—
—
Artist
*
Album
*
Song
—
Album
*
Song
—
—
Song
—
—
—
Podcast
Episode
—
—
Genre
*
Artist
*
Album
*
Song
Composer
*
Album
*
Song
—
Audiobook
—
—
—
Summary of Contents for IVA-W502R
Page 2: ......
