72
-EN
• Disc was forcibly pulled out by hand during Auto Loading.
- When the error indication remains after loading, try to load
again.
If the error indication still does not turn off after pressing for a
few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
-
*
Touch [EJECT] of DISC on the EJECT/TILT screen.
- Change the disc.
* IVA-W502R: Press
OPEN
on the front panel.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate is supported by the unit.
Indication for DVD/Video CD
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps.
Press OPEN for at least 3 seconds.
• Button operation on the unit or remote control is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• Mechanism error.
1)
*
Touch [EJECT] of DISC on the EJECT/TILT screen and
eject the disc.
If not ejecting, consult your Alpine dealer.
* IVA-W502R: Press
OPEN
on the front panel.
2) When the error indication remains after ejecting,
*
touch
[EJECT] of DISC on the EJECT/TILT screen again.
If the error indication still does not turn off after
*
touching
[EJECT] of DISC on the EJECT/TILT screen for a few times,
consult your Alpine dealer.
* IVA-W502R: Press
OPEN
on the front panel.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
-
*
Touch [EJECT] of DISC on the EJECT/TILT screen.
- Change the disc.
* IVA-W502R: Press
OPEN
on the front panel.
• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
Indication for CD changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
(DivX
®
mode)
Summary of Contents for IVA-W502R
Page 2: ......
