Alpine IVA-W502R, Owner'S Manual

Page: 43 / 86

41
-EN
Setting item: BLUETOOTH IN
Setting contents: OFF / NAV. (IVA-W505R only) / ADAPTER
• The setting cannot be made when “Setting the External Device
Interrupt Mode” (page 39) is set to ON.
• For details on Bluetooth operation, refer to the Owner’s Manual of
the Bluetooth Box.
• If the Bluetooth Box compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
• If ON is set even when a CD changer is connected, the source name
on the SOURCE selection screen will change from CD CHG to USB.
Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
The unit’s (OPTION) button function can be changed.
Setting item: OPTION KEY
Setting contents: V. SEL / TEL
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
Setting item: AUX+ IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX + cannot be
changed from this unit.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
Setting the Bluetooth Connection
(BLUETOOTH IN)
OFF: Select to ignore any external interrupts.
NAV.:
(IVA-W505R only)
Select when the optional portable navigation
is connected.
The TEL screen of the portable navigation is
displayed.
ADAPTER:
Select when the optional Bluetooth box is
connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the
display changes to the TEL screen.
Setting the USB Adapter to ON/OFF
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
Setting the VISUAL Soft Button
VISUAL:
Recalls the VISUAL selection screen by touching
[VISUAL] .
NAV.: Switches directly to the navigation screen by touching
[VISUAL] .
Setting the OPTION Button on the Unit
V. SEL: Press (OPTION) to recall the V. SEL screen.
TEL: If you press (OPTION) when the Bluetooth Box is
connected, the Bluetooth TEL screen will be recalled.
Setting the Digital Output
Setting the AUX+ Mode
OFF: AUX+ source is not displayed.
ON: AUX+ source is displayed.
Adjusting the AUX+ Audio Level
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.