Jeep Wrangler
X409-WRA-JL 20200825v1
10/29
13
For vehicles with the power inverter remove the
ventilation duct behind the drivers side knee panel
using a panel removal tool to release the one clip
holding it in place. Once the installation of the
X409-WRA-JL tuner is completed the vent can go
back in place.
14
For vehicles with heated seats or the power
inverter the bracket for the module needs to be
removed. Remove the (4) 10mm screws to remove
the bracket. Then remove the (2) 8mm screws lower
and the (2) 10mm screws top to remove the module.
16
Remove the A pillar by removing the (2) 8mm
screws and unclipping the panel. The screws can
be exposed using a panel removal tool.
Factory Unit Disassembly Process (Continued)
15
Remove the two knee panel brackets. Each
bracket is held in by (1) 10mm screw.
