19
-EN
Display Setup Operation
1
Touch
[
]
on the Home screen.
The Setup main screen is displayed.
2
Touch
[Display]
.
The Display Setup screen appears.
•
You can display the Display Setup screen from each application
screen. Touch
[
]
on any application screen (video mode).
3
Touch the desired application.
•
“Auxiliary (AUX)” can be selected while in AUX mode.
•
The camera names set under the “Camera” settings are
displayed. The camera names are not displayed when “Off” is
set (page 23).
4
Touch
[ ]
of the desired item.
Settable items differ depending on the application.
[Auxiliary (AUX)]:
Display Mode / Brightness / Color / Contrast / Sharpness
[Camera]:
Brightness / Color / Contrast
5
Touch
[
]
or
[
]
to change its setting.
6
Touch
[
]
to return to the main application screen.
Touch
[ ]
to return to the previous screen.
•
Immediately after changing the settings of Display Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
Setting item: Display Mode
Setting contents: WIDE (Initial setting) / NORMAL
In WIDE mode, the picture is stretched horizontally to fill the
entire display.
In NORMAL mode, the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
Setting item: Brightness
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
Setting item: Color
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the Color between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Setting item: Contrast
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the contrast between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Setting item: Sharpness
Setting content: -3 to +3 (Initial setting: 0)
Picture quality adjustment range is -3 to +3. “SOFT” and “HARD”
appear as the minimum and maximum values.
Display Setup
The parking brake must be engaged to access the Display Setup
screen. Attempting to access this screen while driving will
display the warning-Unable to operate while driving.
The following steps 1 to 6 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.
Switching Display Modes
Adjusting Brightness
Adjusting Color of Picture
Adjusting Image Contrast
Adjusting Picture Quality
Summary of Contents for iLX-007E
Page 2: ......
