11
-EN
ALPINE HCE-C200R 68-09359Z09-A (EN)
---- To monitor or navigation reverse
input
---- To plus side of the back lamp
signal lead of the car
----
Connect to a metal part of
chassis body with a screw
REVERSE IN
Fuse (7.5A)
Switched Power Lead (Ignition)
Connect this lead to an open terminal on the
vehicle's fuse box or another unused power
source which provides (+)12V only when the
ignition is turned on or in the accessory
position.
Cable Specifications
Reverse Output Lead
This transmits to the monitor or navigation that
the car’s transmission is shifted into reverse.
Reverse Input Lead
Connect to the plus side of the car's reverse
lamp that lights when the transmission is
shifted into reverse (R).
Switches the video picture to the back-up
camera. This is linked with putting the car into
reverse (R).
Ground Lead
Connect this lead to a good chassis ground on
the vehicle. Make sure the connection is made
to bare metal and is securely fastened using
the sheet metal screw provided.
Cable Color
Orange/Black
Orange/White
Black
Red
Ignition Key
REVERSE OUT
Connections
GND
IGNITION
1
V.OUT Terminal
Connect this to the camera terminal of the monitor
or navigation.
2
OTHER CAMERA Terminal
Not used.
3
FRONT CAMERA Terminal
Connect this to the front camera (HCE-C200F)
4
REAR CAMERA Terminal
Connect this to the rear camera (HCE-C200R)
5
Switch Terminal
Connect this to the switch (HCE-C200R included)
1 2
3
4
5
Summary of Contents for HCE-C200F
Page 17: ......