Alpine CVA-1014R, Owner'S Manual

Page: 14 / 67

13
-EN
Receiving Traffic Information While
Playing CD or Radio
1
Press TA/ANNC. repeatedly until the TA indicator
appears in the display.
2
Press g and f to select a traffic
information station if necessary.
•
When a traffic information broadcast starts, the
unit automatically mutes the optional CD
player or the regular FM broadcast.
•
When the traffic information broadcast finishes,
the unit automatically returns to the original
source play before the traffic information
broadcast began.
•
When traffic information stations cannot be
received:
In the tuner mode:
When the TP signal can no longer be
received for over 1 minute, the "TA" indicator
blinks.
In the CD mode:
When the TP signal can no longer be
received, the traffic information station of
another frequency will be selected
automatically.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternative frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If
the station being received does not broadcast the traffic
information, the receiver automatically tunes in the
related station that broadcasts the traffic information
when it occurs.
3
Press TA/ANNC. to deactivate the Traffic
Information mode. The TA indicator disappears.
NOTE
The unit automatically switches to a traffic information
announcement even if you are listening to a source other
than the radio or CD player (e.g. DVD player).
PTY (Programme Type) Tuning
1
Press FUNC so that the FUNC indicator appears
in the sub-display. To perform the same operation
with the monitor open, press
FUNC only when
"FUNC" lights red in the monitor.
2
Press 2/PTY to activate the PTY mode, while the
unit is in Radio (FM Receiving) mode. The
Programme Type of the station being currently
received will be displayed for 5 seconds.
If there is no receivable PTY broadcast, "NO
PTY" will be displayed for 2 seconds.
NOTE
If no button is pressed within 5 seconds after pressing
2/PTY , the PTY mode will be automatically cancelled.
3
Press g or f within 5 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
→
LIGHT M
→
CLASSICS
→
OTHER M
4
Press 2/PTY within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
In the sub-display, the desired programme type
indicator blinks during the search, and lights when a
station is found. In the monitor, “PTY SEEK” is
displayed during the search, and the current
programme type name appears if the station is
found.
If no station is found, "NO PTY" will be displayed
for 2 seconds.
5
Press FUNC to activate the normal mode. The
"FUNC" indicator will turn off.
RDS Operation