background image

15

-EN

This device also can play back discs in Joliet, Romeo, etc., and other 
standards that conform to ISO9660. However, sometimes the file 
names, folder names, etc., are not displayed correctly.

Formats supported

This device supports CD-ROW XA, Mixed Mode CD, Enhanced CD 
(CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with Track At 
Once or packet writing.

Order of files

Files are played back in the order that the writing software writes them 
to the disc. Therefore, the playback order may not be what is expected. 
Verify the writing order in the software’s documentation. The playback 
order of the folders and files is as follows.

*

The folder No./ folder Name will not be displayed if no file is contained 
in the folder.

Bit rate

This is the “sound” compression rate specified for encoding. The higher 
the bit rate, the higher the sound quality, but also the larger the files.

Sampling rate

This value shows how many times per second the data is sampled 
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so 
the sound is sampled (recorded) 44,100 times per second. The higher 
the sampling rate, the higher the sound quality, but also the larger the 
volume of data.

Encoding

Converting music CDs, WAVE (AIFF) files, and other sound files into the 
specified audio compression format.

Tag

Song information such as track titles, artist names, album names, etc., 
written into MP3/WMA/AAC files.

Root folder

The root folder (or root directory) is found at the top of the file system. 
The root folder contains all folders and files. It is created automatically 
for all burned discs.

Adjusting Subwoofer Level/Bass Level/Mid 
Level/Treble Level/Balance (Between Left 
and Right)/Fader (Between Front and Rear)/
AUX Mix Level/Loudness/Defeat

1

Press 

AUDIO

 repeatedly to choose the desired mode.

Each press changes the mode as follows:

SUBW

*1

 

 BASS

*2

 

 MID

*2

 

 TREBLE

*2

 

 BAL 

 FAD 

 AUX 

MIX

*3

 

 LOUD

*2

 

 DEFEAT 

 VOLUME 

 SUBW

*1

When the subwoofer mode is set to OFF, its level cannot be 
adjusted, refer to “Turning Subwoofer ON/OFF” on page 17.

*2

Adjustable only when DEFEAT is OFF.

*3

Adjustable only when AUX MIX is ON (refer to “Setting the 
AUX MIX” on page 21).

Notes

• If no operation is performed for 5 seconds, the unit automatically 

returns to normal mode.

• Loudness introduces a special low- and high-frequency emphasis at low 

listening levels. This compensates for the ear’s decreased sensitivity to 
bass and treble sound.

2

Turn the 

Rotary encoder

 until the desired sound is 

obtained in each mode.

By setting DEFEAT ON, previously adjusted level settings of 
BASS, MID, and TREBLE will return to the factory defaults.

Terminology

Root folder

Folder

MP3/WMA/AAC File

Sound Setting

Subwoofer

0 ~ +15

Bass level

-7 ~ +7

Mid level

-7 ~ +7

Treble level

-7 ~ +7

Balance

L15 ~ R15

Fader

R15 ~ F15

AUX Mix level

0 ~ 15

Loudness

ON/OFF

Defeat

ON/OFF

Volume

0 ~ 35

Rotary encoder/ 

/ENTER

AUDIO/SETUP

Summary of Contents for CDE-123R






































Reviews: