11
-EN
Receiving RDS Regional (Local) Stations
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER mode, and
then press
ENTER
.
BLUETOOTH
*
GENERAL
AUDIO
DISPLAY
TUNER
iPod & USB
*
Displayed only when INT MUTE is OFF, and the mode is set to
other than BT AUDIO.
3
Turn the
Rotary encoder
to select the RDS REG mode, and
then press
ENTER
.
4
Turn the
Rotary encoder
to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Press
to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
PI SEEK Setting
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER mode, and
then press
ENTER
.
BLUETOOTH
*
GENERAL
AUDIO
DISPLAY
TUNER
iPod & USB
*
Displayed only when INT MUTE is OFF, and the mode is set to
other than BT AUDIO.
3
Turn the
Rotary encoder
to select the PI SEEK mode, and
then press
ENTER
.
4
Turn the
Rotary encoder
to select ON or OFF.
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Press
to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting PTY31 (Emergency Broadcast)
reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select the TUNER mode, and
then press
ENTER
.
BLUETOOTH
*
GENERAL
AUDIO
DISPLAY
TUNER
iPod & USB
*
Displayed only when INT MUTE is OFF, and the mode is set to
other than BT AUDIO.
3
Turn the
Rotary encoder
to select ALARM, and then press
ENTER
.
4
Turn the
Rotary encoder
to select ON or OFF.
If you set to ON, emergency broadcasts are received regardless
of source. “ALARM” is displayed during reception.
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
When an emergency broadcast is received, the volume level will
be automatically changed to the memorized level in the traffic
information mode. For details, refer to “Receiving Traffic
Information” on page 11.
Notes
• Pressing
during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
Receiving Traffic Information
1
Press and hold
TA
for at least 2 seconds so that the “TA”
indicator lights up.
2
Press
or
to select your desired traffic information
station.
When a traffic information station is tuned in, the “TP” indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows “T INFO”.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
• If the traffic information broadcast signal falls below a certain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 1 minute, the “TA” indicator blinks.
• If you do not want to listen to the traffic information being received,
lightly press
or
to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.
Summary of Contents for CDE-123R
Page 2: ......
