background image

22

-EN

Note

• Refer to the table below for the Russian display on this unit.

Connecting to an External Amplifier (POWER IC)

When an external amplifier is connected, sound quality can be 
improved by stopping the power supply of the built-in amplifier.

Setting item: 

POWER IC

Setting contents:

ON (Initial setting) / OFF

ON :

The speakers are driven by the built-in amplifier.

OFF :

Use this mode when the line output of this unit is used to drive an 
external amplifier. In this setting, the head unit’s internal amplifier 
is turned OFF and cannot drive speakers.

ON :

OFF :

Note

• No sound is produced by the system when the power output is set to 

OFF.

Demonstration

This unit has a demonstration feature for the display.

Setting item: 

DEMO

Setting contents:

DEMO ON / DEMO OFF (Initial setting)

Note

• To quit Demo mode, set to DEMO OFF.

DISPLAY is selected on the setup main menu in step 2.

Changing Lighting Colour

You can change the lighting colour of the following six buttons. 

SOURCE



FAV

 , 

BAND

 and 

.

Setting item: 

ILLUMINATI

Setting contents:

ILUM TYPE1 (Initial setting) / TYPE2 /TYPE3 / TYPE4

TYPE1 :

When the colour of the six buttons is blue, the colour of the other 
is red.

TYPE2 :

When the colour of the six buttons is green, the colour of the other 
is green.

TYPE3 :

When the colour of the six buttons is amber, the colour of the 
other is red.

TYPE4 :

When the colour of the six buttons is red, the colour of the other is 
red.

Scroll Type Setting

Choose from two scrolling methods.
Select the type you prefer.

Setting item: 

SCROLLTYPE

Setting contents:

SCR TYPE1 / SCR TYPE2 (Initial setting)

SCR TYPE1:

The characters scroll from right to left, a single character at a time.

SCR TYPE2:

Words are built up from left to right, a single character at a time. 
When the display is filled, it is cleared and the remaining words are 
displayed the same way until all words of the title have been 
shown.

D

D:
C:

C

D C

D C

D C

 

Speakers

SPEAKER 
RIGHT FRONT 

Front 
right

SPEAKER 
RIGHT REAR 

Rear 
right 

SPEAKER 
LEFT REAR

Rear 
left 

SPEAKER 
LEFT FRONT 

Front 
left 

Display Setting

 

 

Front 
left

Amplifier

Front 
right

Rear 
left 

Amplifier

Rear 
right 

Summary of Contents for CDE-123R






































Reviews: