7
-EN
01GB05CDA9857.fm
ALPINE CDA-9857 68-04123Z47-A (EN)
Initial System Start-Up
Be sure to press the
RESET
switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press
(OPEN) to open the front panel, then
remove it.
3
Press
RESET
with a ballpoint pen or similar pointed
object.
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
MUTE
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
MUTE
again will bring the audio back to its
previous level.
Setting the Time and Calendar
1
Press
MENU
to select SETUP, then press
MODE
.
BBE
BASS ENGINE
SETUP
RETURN (OFF)
BBE
2
Press
or
to select the GENERAL mode,
then press
MODE
.
GENERAL
TUNER
AUDIO
DISPLAY
DEMO
3
Press
or
to select “Clock Adjust,” then
press
MODE
.
4
Turn the
Rotary encoder
to set year.
5
Press
MODE
.
6
Repeat steps 4 and 5 above to set month, day, hour
and minutes.
7
Press
MENU
to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding
MENU
for at least 2 seconds will
return to normal mode.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold
MODE
for at least 2 seconds after
setting the “hour.” Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
RESET switch
01GB00CDA9857.book Page 7 Thursday, December 1, 2005 4:23 PM
