22
-EN
XM Radio Operation (Optional)
SOURCE/
POWER
Preset buttons
(1 through 6)
BAND/
TEL.
f
g
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID
number for your XM Radio Receiver in order to
subscribe to XM's programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the CDA-9807/
CDA-9805 in the following way.
1
While receiving XM1/XM2/XM3, press the
g
or
f
button to select channel “0.”
2
The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
3
To cancel the ID number display, set the channel to
other than “0.”
Tips
There is another way to display your ID number.
1. Press and hold the
F/SETUP
button for at least 3 seconds.
2. Press the
f
or
g
button repeatedly to select “ID.”
3. Press the
BAND/TEL.
button to display your ID number.
4. After checking your ID number, press the
F/SETUP
button to
return to the normal display.
NOTES
•
You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.
•
You can check your ID number printed on the label on the
package of your XM Satellite Radio Receiver (TUA-T021XM).
Storing XM Channel Presets
1
Press the
BAND/TEL.
button to select the desired
band (XM1, XM2 or XM3) you want to store.
2
After tuning in the desired channel, press and hold any
one of the
Preset buttons (1 through 6)
that you want
to store the station on for at least 2 seconds. The
selected station is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 18 channels can be stored in the preset
memory (6 channels for each band; XM1, XM2 and
XM3).
NOTE
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving Stored XM Channels
1
Press the
BAND/TEL.
button to select the desired
band (XM1, XM2 or XM3).
2
Press the channel
Preset
button that has your desired
satellite channel in memory.
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio
∗
is the next generation of audio
entertainment, with up to 100 brand-new digital
channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-
coast via satellite. For more information, visit XM’s
website at
www.xmradio.com
or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T021XM)
and an optional XM Antenna may be connected to the
CDA-9807/CDA-9805. With an XM Receiver connected
to the Ai-NET input of the CDA-9807/CDA-9805, the XM
Receiver will be controllable from the CDA-9807/CDA-
9805.
∗
XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
NOTES
•
The controls on the CDA-9807/CDA-9805 for XM
Receiver operation are operative only when an XM
Receiver is connected.
•
The XM1, XM2 or XM3 band illuminates when in XM
mode.
1
Press the
SOURCE/POWER
button to select XM
Mode.
2
Press the
BAND/TEL.
button to select XM1, XM2 or
XM3.
3
Press the
g
or
f
button to select the desired
channel. Holding the
g
or
f
buttons will change
channels continuously.
Rotary encoder
SEARCH
F/SETUP
DISP/
TITLE
Summary of Contents for cda-9805
Page 40: ......
