Alpine CDA-7998R, Owner'S Manual

Page: 37 / 56

35
-EN
4
Press the BAND button to set ON/OFF for the selected
Announcement.
Repeat Steps 3 and 4 to set more.
5
To set the Announcement Select mode OFF, press the
T.INFO button for at least 2 seconds.
NOTES
•
When one of the selections between "All Select" and
"Financial" is set ON, no announcement interrupts are
made if you set OFF for the "Announcement."
•
If you set ON/OFF with the "All Select" selection, you can
set ON/OFF for the selections from "Traffic News" to
"Financial."
Tips
•
When an urgent broadcast is received, the mode
automatically changes to the DAB mode to receive the
Alarm Announcement. If you adjust the volume level at this
time, that volume level is memorized, and that volume level
is applied the next time you receive an urgent broadcast.
•
If the announcement that you select in Step 3 interrupts, the
selected announcement Label is displayed. If you adjust the
volume level at this time, that volume level is memorized,
and that volume level is applied the next time announcement
interrupts.
Changing the Display Mode
You can display information that is sent from broad-
casting stations, such as the channel number or the
service name that you are receiving or listening.
1
While receiving DAB, press the TITLE button to change
the display mode.
∗
1: You can display this only when the broadcasting
station supplies the Service Component Label.
Otherwise, “NO COMPONENT” is displayed.
∗
2:
•
If you set “SCROLL ON” for “CD Text Scroll
Setting,” the character information that is sent
from the broadcasting station is scrolled when it
displayed.
If you are set to “SCROLL OFF” while displaying
the Dynamic Label and press and hold the TITLE
button for at least 3 seconds, you can scroll the
character information once.
•
“NO TEXT” is displayed when broadcating
stations which contain no Dynamic Label are
received. However, when a station is waiting for
its reception, “WAITING” is displayed.
Turning ON/OFF Traffic News
Announcement
When you set to ON, you can automatically receive the
Traffic News.
1
Press the T.INFO button to set ON/OFF for the Traffic
News.
You can also set the RDS stations at the same time.
NOTE
This operation can also be performed by turning the Traffic
News ON/OFF in the "Setting the Announcement Select Mode"
section on this page.
Setting the Announcement Select
Mode
1
Press the T.INFO button for at least 2 seconds to turn
ON the Announcement Select mode.
2
Press the
g
DN or
f
UP button to select
“Announcement,” and then press the BAND button to
set it ON.
3
After turning ON the “Announcement,” press the g
DN or
f
UP button to select your desired
Announcement.
Channel No. Display
↓
↓
Ensemble Label Display
↓
Service Label Display
↓
Component Label Display
∗
1
↓
Dynamic Label Display
∗
2
Announcement
↓
↓
All Select
↓
Traffic News
↓
Travel News
↓
Warning
↓
News
↓
Weather
↓
Event
↓
Special Event
↓
Radio Info
↓
Sports news
↓
Financial