Alpine 68-13530Z42-A Owner'S Manual Download Page 6

4

-EN

Operating Instructions

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR 
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. 

Any function that requires your prolonged attention should only be 
performed after coming to a complete stop. Always stop the vehicle 
in a safe location before performing these functions. Failure to do 
so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL 
HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency 
vehicle sirens or road warning signals (train crossings, etc.) can be 
dangerous and may result in an accident. LISTENING AT LOUD 
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING 
DAMAGE.

MINIMIZE DISPLAY VIEWING WHILE DRIVING. 

Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. 

(Check with your dealer if you are not sure.) Failure to do so may 
result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT 
OF THE REACH OF CHILDREN. 

Swallowing them may result in serious injury. If swallowed, 
consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING 
FUSES. 

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS. 

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. 

Use for other than its designed application may result in fire, 
electric shock or other injury.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the 
product. Return it to your authorized Alpine dealer or the nearest 
Alpine Service Center for repairing.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more 
severe stains, please dampen the cloth with water only. Anything 
else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is b60°C 
(+140°F) and –10°C (+14°F) before turning your unit on.

Maintenance

If you have problems, do not attempt to repair the unit yourself. 
Return it to your Alpine dealer or the nearest Alpine Service 
Station for servicing.

Installation Location

Make sure the iDA-X305S will not be installed in a location 
subjected to:

• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations

Protecting the USB connector

• Only an iPod/iPhone, USB memory or Portable audio player can 

be connected to the USB connector on this unit. Correct 
performance using other USB products cannot be guaranteed. 

• If the USB connector is used, be sure to use only the supplied 

connector cable with the unit. A USB hub is not supported.

• Depending on the connected USB memory device, the unit may 

not function or some functions may not be performed.

• The audio file format that can be played back on the unit is MP3/

WMA/AAC.

• Artist/song name, etc., can be displayed, however characters 

may not be correctly displayed.

WARNING

WARNING

This symbol means important instructions. 
Failure to heed them can result in serious injury 
or death.

CAUTION

This symbol means important instructions. 
Failure to heed them can result in injury or 
material property damage.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc., 
is lost while using this product.

Summary of Contents for 68-13530Z42-A



















































Reviews: