User manual UNii
Rev.2.11 – 14-07-2022
9
EN
User Menu
In this chapter the different programming options and functions of the (user) menu are explained. Depending on
the rights (set in the profile of users), some options may or may not be visible.
Information
The following functions are available under the "Information" sub-menu:
Notifications
The notifications menu shows the alarm and / or system events that are still present in the system's memory. The
messages can be deleted using the "Delete all" function key, provided the alarm situation has been removed. If
notifications cannot be deleted, a new notification will be given.
Open inputs
Using this menu option, it is possible to see which inputs (sensors) are still open (in alarm).
Section status
The status section is displayed in this option. An open circle indicates section is disarmed, a flashing circle
indicates section not ready to arm, a closed circle means section armed.
Event log
The last 1000 system events are stored in the Event log menu and cannot be deleted. By selecting a log line with
function key "Select", detailed information can be displayed if available.
System info
This screen shows the software version of the system and the IP address.
UNii manager key
This screen shows the unique key of your UNii security system. The installer needs this key to connect to the UNii
manager tool to program the system.
Overtime
With this option an overtime time can be programmed for the automatic arming function, if used. Select the
correct time switch from the list and enter the time you would like the system to stay disarmed.
(Un)-Bypass
A list of inputs is displayed in the bypass menu, a selected input can be bypassed or un-bypassed. By bypassing
an input, it is temporarily disabled. Not all inputs can be bypassed, this is determined by the installer during
installation.
