User manual UNii
Rev.2.11 – 14-07-2022
7
EN
Operation
Arming
To arm the system, press the function button "Arm", You will now be asked to enter a valid PIN code. Once the
valid PIN code has been entered, the section or group for which the user is authorized will be displayed and can be
armed. An open circle is shown in front of the name of the section or group, this indicates that the section or
group is disarmed, if the circle is flashing the section or group is not ready to be armed. If the circle is closed, then
the section or group is already armed.
Select the section or groups to be armed by using the "Select" function key, a tick (
) will appear behind each
section or group. Multiple section or groups can be selected. When all section or groups are selected press the
"Arm" function key to arm the selected sections or groups.
After starting the arming procedure, the exit delay is heard (if set) via the buzzer of the keypad. The buzzer beeps
faster during the last 5 seconds of the exit time. Opening a delayed zone after the exit time has expired will start
the entry procedure.
If an arming cannot be successfully completed (e.g., if an input remains open) then the system will not be armed.
At that moment, a double beep will be heard via the buzzer of the keypad and on the loudspeaker output of the
UNii.
In addition to using a PIN code, it is also possible to arm with a tag/card if the keypad is equipped with a built-in
card reader. For arming with a tag/card, see "Arming with a tag" later in this manual.
NB. When the system is configured by the installer for arming without a PIN-code, the step to request a PIN-code
will be skipped.
Disarming
To disarm the system, press the function button "Disarm", you will now be asked to enter a valid PIN code. After
entering a valid code, the sections or group that can be disarmed are displayed. A closed circle is displayed in
front of the name of the section or group, indicating that the section or group is armed. Use the "Select" function
key to select the section or group to be disabled, a tick (
) will appear after each section or group. Multiple
sections or groups can be selected. If all sections or groups are selected press the "Disarm" function key to
disarm the selected sections or groups.
Hot keys
The 3 left function keys can also be used as a hotkey. For example, your installer can program a hotkey to be used
to arm certain sections in the night mode or activate an output to open the gate. Ask your installer about the
options.
Status
The section statuses of the system can be viewed using the section function key. An open circle means section or
group disarmed, a flashing circle means section or group not ready to arm, and a closed circle means section or
group armed.
