Alphasonik APP122, Owner'S Manual

Page: 5 / 16

Contents of Carton
4
• Amplifier
• Enclosure
• Amplifier Wiring Kit
• Remote Bass Knob
• Sticker
• Operations Manual
1. Make sure to carefully read and understand the instructions before attempting
to install your new Bass System.
2. Before making any electrical connection, make sure that you disconnect the
battery’s ground cable to prevent the possibility of short circuit or damage to
your electronic equipment.
3. For easier assembly, we suggest you run all wires prior to mounting your
amplifier and/or enclosure.
4. Route all of the RCA cables close together, and away from any power wires.
5. Think before you drill! Be careful not to cut or drill into gas tank, fuel lines,
brake or hydraulic lines, vacuum lines, or electrical wiring when working on
any vehicle.
6. Avoid running wires over or through sharp edges. Use rubber or plastic
grommets to protect any wires routed through metal, especially the firewall.
7. ALWAYS protect the battery and electrical system from damage with proper
fusing.
8. When grounding to the chassis of the vehicle, scrape all paint from the metal
to ensure a good clean ground connection. Grounding connections should be
as short as possible, and always be connected to metal that is welded to the
main body or chassis of the vehicle.