Alphasonik APP122, Owner'S Manual

Page: 13 / 16

Warning And Disclaimer
12
Do not use the equipment unmounted.
Do not mount the system so that wire
connections are unprotected or are subjected to pinching or damage from nearby
objects. Confirm that your source unit and other equipment are turned off while making
connections. If you need to replace the power fuse, replace it only with a fuse
identical to the provided fuse. Using a fuse of different type or rating may result in
damage to the system, which is not covered by the manufacturer’s warranty. Do not
install any product where it may be subjected to excessive heat, moisture and dust or
where it may be repeatedly kicked, brushed or bumped. Make absolutely sure that
the terminals for the products are connected to the proper inputs and outputs from the
audio source.
Disclaimer
Specifications are subject to change without notice.
For the most updated Specifications check the Alphasonik
website. www.alphasonik.com
If you observe that the protection LED is lit, please check the system carefully to
determine what has caused the protection circuit to engage. The amplifier shut down due
to a thermal overload condition, please allow it to cool down before restarting. If the
amplifier shut down because of an input overload or short circuit, be sure to repair these
conditions before attempting to power up the amplifier again.