23
We reserve the right to modify technical specifications without prior notice.
UK830637/210804 – Translation of the operating manual © Alpha-InnoTec GmbH
note.
a connection to a computer or a network
can be installed via the left bushing on
the bottom of the control element, thus
allowing the heating and heat pump
regulator to be controlled remotely. one
precondition is that a shielded network
cable (category 6) has been installed
through the unit as part of the electrical
connection work.
operating manual for the heating and heat pump
regulator, version “qualified technician”, “Web
server” section.
If this network cable is available, insert
the network cable’s rJ-45 plug into the
left bushing of the control element.
note.
the network cable can be retrofitted at
any time. However, in order to be able
to connect it, the screen must first be
removed.
installation and removal of the
screen
installing the sCreen
note.
the screen is provided at the time of
delivery so that the control element may
be inserted in the upper recesses of the
front façade.
If the control element has been inserted in
the lower recesses of the front façade, you
must first remove the screen’s temporary
cover and then reinsert it above the logo.
Screen at time of delivery:
1 Recess for control element
2 logo
3 Temporary cover
first, insert the screen below, in the provided
slots on the façade...
Beginning first on one side and moving upwards,
lock the screen’s snap-in lugs in place in the slots
provided on the façade...
