Alpha Tri Power X33 TE, Installation And Operation Manual, Page: 50 / 59

Tri Power X33 TE 10/20/30/40/60 kVA
47
All menu functions are showing in below table.
Menu Sub-Menu Functions
Mimic Display
Display the UPS status
、
alarm
、
operating mode and
measurements. Please refer to section 4-3 for more detail.
Command #1
Operation

Normal mode

ECO mode

Converter mode

Shutdown

Shut down converter expect bypass

Cold start precharge ready
Buzzer & Alarm

Enable/Disable Buzzer

Clear latch alarm and buzzer.
Other

Recover backfeed protection signal

Battery Test
Monitor
Identification Display UPS information
Real Time
Information
Display real time measurements of input, output, bypass and
battery.
Maintenance
Code
Display the maintenance code for technician to check the
status of the UPS.
Version Disply the control MCU software and firmware version.
Configuration
Alarm
Set alarm latch function.

General Alarm

Mains Alarm

Bypass Alarm

Over Temperature

Battery Low

Inverter Overload

Bypass Overload

Emergency Stop
Main
Select the measurements on Mimic Display.
Bypass
Output