14
Spanner Wrench
T-handle Wrench...turn
clockwise to loosen
WATER FLOW
Connect only to an isolating transformer when using water
fl ow.
Connect the nylon hose onto the water valve, then connect
the adapter on the nylon hose to the water faucet.
Simply adjust the volume of the water fl ow by turning the
handle on the water valve.
ADJUSTING CUTTING DEPTH
Loosen the wing screw on the depth indicator and move the base plate up or down
to the desired cutting depth. Re-tighten the wing screw to a hand tight condition as
shown in Figure 11 and Figure 12.
ASSEMBLING & DISASSEMBLING
Make certain to switch off the machine and unplug from outlet
before assembling or disassembling of the saw blade.
Clamp the fl ange with spanner wrench and loosen bolt by
turning the T-handle clockwise to loosen. Disassemble bolt,
fl ange and saw blade.
Please follow the same but reverse procedures when reas-
sembling the saw blade.
Be sure the direction shown by arrow on the surface of
the saw blade is the same as that shown on the cap of the
machine. Make certain the bolt is fi rmly tightened.
1.
Wing Screw
Figure-11
Figure-12
Figure-10
Figure-13
Figure-14
