12
APL48-50LFP liFePO
4
Battery Operation Manual
4.5
- Shipment
The battery should be packed in cartons under the condition of half capacity 20%-50% for
shipment. The violent vibration, impaction or squeezing should be avoided in the transport
process; neither is exposed in the sunlight nor rain. The batteries shall be shipped by normal
transportation such as by road, by train, by ocean or by air.
4.6
– Installation
Unboxing & Inspection
Please read this manual before installation.
Please inspect the package before unboxing, if any destroy with appearance, contact
with the supplier as soon as possible.
This device shall be installed and operated by professionals.
Preparation for Installation
Batteries shall not be placed in direct sunshine or close to heat source.
Batteries shall be installed in place with good ventilation to assure enough heat
dissipation.
Batteries shall be placed in are with clean ambient and low humidity.
Heavy weight shall not be placed on any cable.
Installation of Battery Modules
1)
Installation and fixation
Battery modules of APL48-50LFP are applicable to installation in 19-inch cabinets and wall-
hanging.
19inch cabinet installation
Insert battery module into 19 inch cabinet, and fix two handles of battery module with
cabinet rack using 4pcs M6 screws.
Wall-hanging installation
Wall-hanging installation also can be adopted, fix two handles of batter module with
triangle rack on the wall using 4pcs M6 screws.
2)
Ground connection
GND screw in front panel of battery is connected with ground through a flexible cable
no less than 6AWG.
