A
DVANCED
S
ETUP
4-37
Routing Table
Parameter Description
Flags
Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.
Network
Address
Destination IP address.
Netmask
The subnetwork associated with the destination.
This is a template that identifies the address bits in the destination
address used for routing to specific subnets. Each bit that corresponds
to a “1” is part of the subnet mask number; each bit that corresponds
to “0” is part of the host number.
Gateway
The IP address of the router at the next hop to which frames are
forwarded.
Interface
The local interface through which the next hop of this route is
reached.
Metric
When a router receives a routing update that contains a new or
changed destination network entry, the router adds 1 to the metric
value indicated in the update and enters the network in the routing
table.
Summary of Contents for Arion 3100-4
