Alpha Telecom Arion 3100-4 User Manual Download Page 41

Page: 41 / 116

SETUP WIZARD

4-3

SETUP WIZARD

Channel and SSID

Click on “SETUP WIZARD” and “NEXT”, then you will see the Channel
and SSID page.

Click “NEXT” to continue.

Parameter

Description

ESSID

Extended Service Set ID. The ESSID must be the same on the

ADSL Router and all of its wireless clients.

ESSID Broadcast Enable or disable the broadcasting of the SSID.
Wireless Mode

This device supports both 11g and 11b wireless networks. Make

your selection depending on the type of wireless network that

you have.

Channel

The radio channel used by the wireless router and its clients to

communicate with each other. This channel must be the same

on the ADSL Router and all of its wireless clients.
The ADSL Router will automatically assign itself a radio

channel, or you may select one manually.

Summary of Contents for Arion 3100-4





















































































































Search results

Summary of Contents for Arion 3100-4

Reviews:

Related manuals for Arion 3100-4

Brands by name

Popular brands

Alpha Telecom Arion 3100-4, User Manual

Search results

Summary of Contents for Arion 3100-4

Reviews:

Related manuals for Arion 3100-4

Brands by name

Popular brands