Alpha Telecom 3100-4g V2 User Manual Download Page 15

Page: 15 / 105

NSTALLATION

2-4

Rear Ports

The ADSL router also provides the following ports on the rear panel:

Figure 2-2. Rear Panel

Item

Description

DSL
Port

WAN port (RJ-11). Connect your ADSL line to this port.

Power Inlet

Connect the included power adapter to this inlet.

Warning

: Using the wrong type of power adapter may damage

the router.

Reset Button

Use this button to reset the power and restore the default
factory settings. To reset without losing configuration settings,
see “Reset” on page 4-61.

On/Off
switch

Use this switch to turn the router ON and OFF.

LAN Ports

4 Fast Ethernet ports (RJ-45). Connect devices on your local
area network to these ports (i.e., a PC, hub, or switch).

Summary of Contents for 3100-4g V2










































































































Search results

Summary of Contents for 3100-4g V2

Reviews:

Related manuals for 3100-4g V2

Brands by name

Popular brands

Alpha Telecom 3100-4g V2, User Manual

Search results

Summary of Contents for 3100-4g V2

Reviews:

Related manuals for 3100-4g V2

Brands by name

Popular brands