0120011-J0 Rev J
60
NOTE:
Highlighting a specific channel and then pressing the Locate button, enables you to
locate the physical LPS module associated with that specific channel.
Once pressed, the LEDs on the selected module cycle briefly for easy identification.
4. In the channel details table, click the
Assign
button. This will assign the channel to the load. The
Assign
button will become disabled and the
Unassign
button will become enabled. In the channel details table, the
Line Power Load
field will be populated with the name of the load.
5. By default, the
Assign
and
Unassign
buttons are disabled unless a load is selected.
6. To unassign a channel from the selected load, click on a highlighted channel and click the
Unassign
button.
This will unassign the channel from the load. The
Assign
button will become enabled and the
Unassign
button will become disabled. In the channel details table, the
Line Power Load
field will be set to “- - -”
