Alpha Micro Eagle 800 II Series, Service Manual

Page: 24 / 24

Page 20 Eagle 800 Series II Service Manual
Rev. A00
> Set Wake up Events …
Wake up by PS/2 Keyboard [Disabled]
Wake up on PS/2 Mouse [Disabled]
Wake up on PME [Enabled]
Resume by alarm [Disabled]
>[PnP/PCI Configurations]
Clear NVRAM [No]
Primary Graphics Controller [AGP]
PCI Slot1 IRQ [Auto]
PCI Slot2/5 IRQ [Auto]
PCI Slot3 IRQ [Auto]
PCI Slot4 IRQ [Auto]
>[Integrated Peripherals]
On-Chip PATA-IDE Controller [Enabled]
USB Controller [Enabled]
USB Legacy Support [Enabled]
On-Chip SATA-IDE Controller [Enabled]
BootRom Function [Enabled]
AC97 Audio [Auto]
On-Chip LAN Controller [Enabled]
BootROM Function [Enabled]
On-Chip Lan P.M.E. [Disabled]
> Set Super I/O
Floppy Controller [Auto]
Serial Port A [Auto]
Parallel Port [Auto]
Parallel Port Mode [EPP]
>[ HW Monitor ]
Chassis Intrusion [Disabled]
>[Cell Menu]
Cool’n’Quite Support [Disabled]
Spread Spectrum [Disabled]
Stop Unused PCI Slot Clock [Enabled]
CPU Ratio [CPU Locked]
Dynamic Overclocking [Disabled]
CPU FSB Clock [210MHZ] this setting will have a range for
stability issues. This will be optimize at the
Factory.
For Eagle800-II
200-215
For Eagle800LC-II 200-215
DRAM Clock Mode [by SPD]
AGP Voltage adjust (V) [Auto]
DRAM Voltage adjust (V) [2.60]
[Save and EXIT Setup]
Exit Saving Changes [yes]