Eagle 800 Series II Service Manual
Page 13
Rev. A00
1. Right click on Disk 1 black bar in the lower panel and
Select
> {New Partition}
2. The < New Partition Wizard> will display.
Select
> [Next].
3. <Select Partition Type>
Select
> {Primary partition} > [Next].
(You can only boot off of a primary partition)
4. <Specify Partition Size> the Partition Size in MB
type in
5004
select
> [Next] button.
5. Allow the program to assign the next drive letter.
Select
> [Next] button.
<Format Partition> { Format this partition with the following settings:}
File
System:
NTFS
Allocation
unit
size:
Default
Volume
Label:
type in
(
SysVol2
)
Check
the {Perform a Quick format box}.
Select
> [Next] button.
Select
> [Finish] button.
6. When XPE finishes formatting the drive, the display will look like this.
Figure 8: Creating SysVol2
7. To set the new SysVol2
Active
right click
on F: and
Select
> {Mark Partition as Active}
8. Now we need to format the second partition.
Right Click
on the black bar and
Select
>
{New Partition }
9. The< New Partition Wizard> will display.
Select
> [Next].
10. <Select Partition Type>
Select
> {
Extended partition
} > [Next].
11. <Specify Partition Size> the Partition Size in MB
type in
33158
select
> [Next] button.
12.
Select
> [Finish] button. This will create a new Light green partition.
13.
Right Click
on the Light Green bar and
Select
> {New Logical}
14. The< New Partition Wizard> will display.
Select
> [Next].
15. <Select Partition Type>
Select
> {Logical drive}> [Next].
16. <Specify Partition Size> the Partition Size in MB
type in
33158
select
> [Next] button.
17. Allow the program to assign the next drive letter.
Select
> [Next] button.
<Format Partition> { Format this partition with the following settings:}
File
System:
NTFS
Allocation
unit
size:
Default
Volume
Label:
type in
(
DataVol2
)
Check
the {Perform a Quick format box}.
Select
> [Next] button.
Select
> [Finish] button.
18. When XPE finishes formatting the display will look like this.
