Alpha IP RTA 61001-N, Quick Install Manual

Page: 22 / 116

22
Decommissioning
POL
RU
S
FIN
DA
N
SWE
NOR
ENGENG ENG
10 Restoring the factory settings
The reset to factory setting will delete all settings made by the user.
Alpha IP Access Point (app)
1. Delete the device from the Alpha IP.
Stand-alone operation
1. Take off the device from the installation bottom (see fig. 5 page 5).
2. Remove the batteries.
3. Re-insert the batteries according to the marking in the battery compartments.
At the same time press the system key (C) for 4 seconds until the LED flashes
rapidly in orange.
4. Release the system key (C).
5. Press the system key (C) again for 4 seconds until the LED lights up in green.
6. Release the system key (C) again.
9 The device restarts.
9 The factory settings are restored.
11 Decommissioning
1. Take off the room control unit Analog from the installation bottom (see fig. 5
page 5).
2. Remove the batteries from the back side.
3. Uninstall the device and dispose of properly.