Alpha IP RTA 61001-N, Quick Install Manual

Page: 21 / 116

21
Cleaning
ENG
NOR
SWE
DA
N
FIN
POL
RU
S
ENG ENG
8 Changing the batteries
The flashing code “short illumination in orange (after green or red reception sig-
nal)” indicates low batteries. At the same time, the symbol for low batteries is
displayed in the Alpha IP app. Replace the batteries by two new ones of the type
LR03/Micro/AAA.
1. Take off the device from the installation bottom (see fig. 5 page 5).
2. Remove the batteries from the back side.
3. Insert two new batteries (type LR03/Micro/AAA) according to the marking (see
fig. 6 page 5).
4. Position the room control unit Analog onto the installation bottom and latch it in.
9 The room control unit performs a self-test for the duration of approximately 2
seconds.
9 This is followed by the initialisation.
9 After that, the test indication flashes (in orange and green).
9 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. In order to remove heavy
contamination, moisten the cloth slightly with lukewarm water. Use a solvent-free
detergent for cleaning.