10
Subject to change without notice | 83056800fUK – Translation of the original operating manual | ait-deutschland GmbH
Dismantle housing panels for transport with
handcart or carrying the unit
Unit is unpacked (
“Unpacking”, page 9).
To avoid damage to the housing panels:
1. Undo 2 screws at the bottom of the front panel.
Lift up the front panel and put down in safe place.
2. Undo the 2 screws at the front of the cover.
Lift the cover slightly, push back by approx. 1 cm
and remove.
3. Undo 2 screws at the right panel.
Lift up the right side panel to the side and put
down in safe place.
4. Undo 2 screws at the left panel.
Lift up the left side panel to the side and put down
in safe place.
1.
4.
3.
2.
8x
Transport with a handcart
NOTE
●
If transporting with a handcart the module
box must be pushed in.
● The following figure with the handcart
shows transporting the unit on its left-hand
side; it can also be transported on its right-
hand side.
Housing panels are dismantled.
To avoid damage: On a handcart, load the unit on its
side only.
Transport unit on the handcart.
Carrying the unit
Housing panels are dismantled.
1. Dismantle module box (
“Dismantle the module
box”, page 11) and carry it by the support lugs
to the place of installation.
2. Carry the housing with the unit components
separately to the place of installation.
