9
We reserve the right to modify technical specifications without prior notice.
UK830533/200610
© Alpha-InnoTec GmbH
Installation and assembly
observe the following when performing all work:
notICe.
always comply with applicable accident
prevention regulations, statutory regula-
tions, ordinances and directives.
WarnIng!
the heat pump or heat pump system may
be installed and assembled only by a quali-
fied technician!
notICe.
observe the sound levels of the respective
model.
overview “Technical data / scope of delivery”,
“Sound” section.
installation loCation
CautIon.
Install the unit only indoors.
The installation area must be frost-free and dry. It must
meet the requirements of dIN eN 378. It must also fulfill
applicable local regulations.
dimensional drawing and installation plan for
respective model.
transport to installation loCation
To prevent damage during transport, always transport
the unit to final installation location in its original packag-
ing, using a lifting truck.
If it is not possible to transport the unit to the final instal-
lation location using a lifting truck, you can also transport
the heat pump using a hand truck or with pipes.
Danger!
several people are required to transport
the unit. Do not underestimate the weight
of the unit.
overview “Technical data / scope of delivery”,
“General unit data” section.
Danger!
unit is not fastened to the wooden pallet.
Danger of tipping over during transport!
this can result in personal injury and dam-
age to the unit.
– take suitable precautionary measures
to eliminate the danger of tipping.
Danger!
Make sure to secure unit against slipping
during transport.
CautIon.
never use components and hydraulic
connections on the unit for purposes of
transport.
CautIon.
Do not damage the hydraulic connections
under any circumstances.
CautIon.
Do not tilt the unit more than a maximum
of 45° (in any direction).
