13
We reserve the right to modify technical specifications without prior notice.
UK830533/200610
© Alpha-InnoTec GmbH
air duCts assembly
proceed as follows:
Remove the parts necessary for the assembly of the
air duct(s) from their respective boxes…
The interlocking of the air ducts is carried out
as described in the section – entitled "Wall
duct(s) assembly".
seCuring the air duCt into the wall duCt
proceed as follows:
pull the roll seal included with delivery over the end
of the air duct…
push this end of the air duct into the wall duct.
1 Wall duct
2 Air duct
3 Roll seal
4 bentonite waterproofing tape
(apply only after assembling the
unit's connection fastener)
Install the wall duct in the masonry
from the
house exterior
. This can either be done during
the construction phase (by means of sealing)…
notICe.
Mount the wall ducts 1 cm above the fin-
ished outer facade.
1 masonry of the house exterior
2 Insert the wall duct in the
masonry (1 cm above the
finished outer facade)
or retrofit (using foam in the masonry):
1 finished outer facade
notICe.
Wall ducts fix wall openings, help avoid
cold air transmission in the masonry as
well as assist in the assembly of weather /
rain guards and wire mesh grilles
