23
We reserve the right to modify technical specifications without prior notice.
UK830533/200610
© Alpha-InnoTec GmbH
Installation and removal of the
screen
installing the sCreen
notICe.
the screen is provided at the time of
delivery so that the control element may
be inserted in the upper recesses of the
front facade.
If the control element has been inserted in
the lower recesses of the front facade, you
must first remove the screen's temporary
cover and then reinsert it above the logo.
Screen at time of delivery:
1 recess for control element
2 logo
3 temporary cover
proceed as follows:
first, insert the screen
below
, in the provided
slots on the front of the facade…
beginning first on one side and moving upwards,
lock the
screen's snap-in lugs in place
in the slots
provided on the front of the facade…
next, on the opposite side, moving upwards.
lock the screen's snap-in lugs
in place
in the slots
provided on the front of the facade…
finally, press the screen's upper snap-in lugs into
the slots provided on the front of the facade.
removing the sCreen
In order to remove the screen, the snap-in lugs
must
first be loosened by pressing one side
completely
toward the middle of the screen
.
Thereafter, remove the snap-in lugs from the opposite
side.
