ADM-VPX3-9V2 User Manual
3.1.2 LEDs
There are 12 LEDs on the ADM-VPX3-9V2 debug board, 8 of which are general purpose and whose meaning
can be defined by the user. These user LEDs do not have a default value, and could be in any state when the
FPGA is unconfigured, or these pins are unconstrained (i.e. they may be on/off/flickering). The other 4 have fixed
functions described below:
D3
D10
D11
NVMRO
STAT_1
D12
STAT_0
Status LEDs
D9
DONE
D2
USER_LED_6_1V8
USER_LED_5_1V8
D4
USER_LED_4_1V8
User LEDs
D1
USER_LED_7_1V8
D7
D6
USER_LED_2_1V8
USER_LED_1_1V8
D8
USER_LED_0_1V8
D5
USER_LED_3_1V8
Figure 8 : Front Panel LEDs
Comp.
Ref.
Function / Net Name
ON State
OFF State
D8
USER_LED_0_1V8
User defined '0'
User defined '1'
D7
USER_LED_1_1V8
User defined '0'
User defined '1'
D6
USER_LED_2_1V8
User defined '0'
User defined '1'
D5
USER_LED_3_1V8
User defined '0'
User defined '1'
D4
USER_LED_4_1V8
User defined '0'
User defined '1'
D3
USER_LED_5_1V8
User defined '0'
User defined '1'
D2
USER_LED_6_1V8
User defined '0'
User defined '1'
D1
USER_LED_7_1V8
User defined '0'
User defined '1'
D9
DONE
FPGA is configured
FPGA is not configured
D10
NVMRO_L
NVMRO signal active
NVMRO signal inactive
D11
Status 1
D12
Status 0
Table 4 : LED Details
See Section
for full list of user controlled LED nets and pins
Page 9
Functional Description
ad-ug-1377_v1_2.pdf