ADM-PCIE-9V5 User Manual
3.6.1 System Monitor Status LEDs
LEDs D5 (Red) and D7 (Green) indicate the card health status.
LEDs
Status
Green
Running and no alarms
Green + Red
Standby (Powered off)
Flashing Green + Flashing Red
(together)
Attention - critical alarm active
Flashing Green + Flashing Red
(alternating)
Service Mode
Flashing Green + Red
Attention - alarm active
Red
Missing application firmware or
invalid firmware
Flashing Red
FPGA configuration cleared to
protect board
Table 6 : Status LED Definitions
3.6.2 Fan Controllers
The onboard USB bus controlled by the system monitor has access to a MAX6620 fan controller. This device can
be controlled through the multiple onboard system monitor communication interfaces, including USB, PCIe Edge
SMBUS, and FPGA sysmon seral communication port. The fan controller is on I2C bus 1 at address 0x2a. For
additional questions. Contact [email protected] with additional questions on utilizing these controllers.
Page 17
Functional Description
ad-ug-1385_v1_0.pdf
