Alpego T10 Series, Manual Of Use And Maintenance

Page: 12 / 34

2 – TECHNICAL SPECIFICATIONS
MOD. TR36
“L” HAMMER
“Y” BLADE
TECHNICAL DESCRIPTION
Model
TR36
- 160 -
TR36
- 180 -
TR36
- 200 -
TR36
- 220 -
TR36
- 240 -
TR36
- 280 -
Working width
160 180 200 220 240 280
Hectares / hour (theoretical)
1,9 2,2 2,4 2,7 3 3,3
HP Needed
(hp) 40/50 50/55 55/60 60/65 65/70 70/75
Blades
(n°) 28 32 32 40 40 48
Hammers
(n°) 14 16 16 20 20 24
Power multiplier with free
wheel
(hp)
80 80 80 80 80 80
Transmission with belts
(n°) 4 4 4 4 4 4
Width
(cm) 180 200 220 240 260 300
Depth
(cm) 122 122 122 122 122 122
Height
(cm) 113 113 113 113 113 113
Weight (Kg)
692 732 782 820
Three-point-hitch (category)
II
P.t.o speed (g/min)
540 / 1000 Optional (*) 1000
Peripheral rotor Speed (m/s)
46,1 44,5
Rotor speed
(g/min) 2132 1934
Transportation position
PORTATO AL SOLLEVATORE TRASVERSALMENTE
Primary transmission
ALBERO CARDANICO
Secondary transmission
A CINGHIE SEZ.SPB
Height of cut regulation
MECCANICA - MANUALE : SLITTE /RUOTE/RULLO
Side move regulation
MECCANICA/IDRAULICA
Multiplier ratio
1/3 1/3 1/3 1/3 1/3 1/1.47
Upper pulley diameter
(mm) 250 250 250 250 250 250
Lower pulley diameter
(mm) 190 190 190 190 190 190
Rotor diameter
(mm) 413 413 413 413 413 439
Pipe diameter
(mm) 168X12.5 168X12.5 168X12.5 168X12.5 168X12.5 193.7X10
(*) In order to use a p.t.o with 1000 RPM it is necessary to reverse the position of the transmission pulleys
Driving pulley Ø 190
Rotor pulley Ø 250
Side moves diagram
NOTE:
P.T.O. shaft works correctly
in a centred position.