7
Step IV. Turn the headphone ON/OFF
To turn the headphones ON, press and hold the Multifunction button 2 seconds. The LED
will flash blue twice, followed by a chime. When the headphones are turned on, it will
automatically search for the paired device and connect to it if available. If the paired device
is not available, the headphones will enter standby mode indicated by a flashing red LED.
After 3 minutes, the headphones will automatically shut off.
To turn the headphones OFF, press and hold the Multifunction Button again for 2 seconds.
The LED will flash, followed by another chime.
If your paired device goes outside the Bluetooth range of the HX101, it will automatically
enter standby mode, and after 2 minutes it will shut off.
LED Indicator Guide:
Mode
LED Color
Flashing Pattern
Power ON
Blue
Flashes twice
Power OFF
Red
Flashes twice
Pairing
Red and Blue Flashing consecutively
Standby
Blue
Flashes 3 times every 5 seconds
Incoming call Blue
Flashes continuously
Low battery
Red
Flashes twice every 2 seconds
Charging
Red
Glowing solid while charging
Fully charged Blue
Glowing solid when charged (connected to charger)
