The, Controller Temp font turns yellow when the remote control is connected to
the device. The thermometer symbol of the same color is displayed in front of
the font, and the temperature value "SET TEMP" is adopted by "Controller
Temp". When the remote control is unplugged or damaged, the "Controller
Temp" turns to a white thermometer symbol and disappears. When the remote
control is inserted but the temperature data cannot be collected, the "small pop-
up window for the failure of the remote control probe" pops up. The set
temperature value "SET TEMP" will be valid for IN TEMP.
Controller Temp
SET THE TEMPERATURE DISPLAY AREA
Temperature display area: displays the set temperature, and the number
switches with the unit switch. This setting can be set on the device as shown
below or on the remote control. Tip: press to confirm the parameters after
setting the parameters.
Temp Setpiont
Press
to Change
27
C
MENU
LESS
ADD
Electric Heat Drying System
09
