ICON DISPLAY AREA
The heating wire starts the heating icon to light up, and the heating wire
closes the icon to hide.
Fan start fan icon lights up and rotates, fan stop icon is hidden.
A t t h e s a m e t i m e , p r e s s t h e
(MENU+ADD) child lock function to
open (the icon is lit). Pressing any
button at this time will not change
the setting of the current screen.
When the buttons are misoperated
for 2 or more times in a row, the
child lock small pop-up window
pops out (as shown below). If you
need to change the setting, you
need to exit the lock mode and press and hold (MENU+ADD) for more
than three seconds to close the child lock mode.
The machine has been locked, and
long press “MENU+ADD” to exit, th
enother keys can be operated.
MENU
LESS
ADD
TEMPERATURE DISPLAY AREA
In Temp: is collected in the temperature probe at the air inlet Controller Temp is
collected in the temperature probe at the remote control.
When the remote control is not connected, the font "IN TEMP" turns yellow. The
thermometer symbol of the same color is displayed in front of the font, and the
temperature value "SET TEMP" is adopted by "IN TEMP". When the remote
control is connected to the device, the "IN TEMP" turns white and the
thermometer symbol disappears. ( the air inlet temperature probe ends the
work of the heating wire as long as the detected temperature exceeds 122
degrees Fahrenheit (50
℃
) in any mode. )
In Temp
Electric Heat Drying System
08
