ALMECO nv
Air and water technologies
Royennestraat 51, B-7700 Moeskroen
[email protected] - www.almeco.eu
4
!
EP10A
compact blower
2. GENERAL EP10A COMPACT BLOWER INFORMATION
All service procedures and electrical work should only be performed by trained personnel. Please read the following
installation, operation and maintenance instructions carefully.
a. Description and model identification
Almeco’s EP10A blower is an industrial type variable speed centrifugal unit capable of producing high velocity hot and
cold air. The unit is available as a standard version (EP10A) for handling air in normal ambient conditions, or as a hot–
air version (EP10AH) where air temperatures of up to 365 ºF (185 ºC) can be processed.
Almeco clearly labels each EP10A/EP10AH blower unit on the back of the blower head, as well as the motor cowl label
(See below). The serial number is located on this label.
Figure 1: Typical Motor label
b. Equipment arrival
•
Important information
Please read the following installation, operation and maintenance instructions carefully. Always ensure that the
power is isolated before commencing any maintenance on the EP10A/EP10AH unit.
•
Equipment arrival/inspection
If there are any shortages, discrepancies or damage to your product upon delivery of your EP10A /EP10AH unit,
please immediately contact Almeco.
Always ensure that the power is isolated and locked off before commencing any maintenance on the
EP10A blower unit.
