Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 19 of 34
4.3. Resetting factory defaults (PO)
Submenu PO allows to reset all settings to factory defaults. Select
menu PO and press the O-key. The display shows PO1 and a flashing
O (= no reset). By pressing the I-key you can select 1 (= reset). Confirm
by pressing the S-key and all settings are reset to factory defaults. The
display shows shortly rESEt.
If you decide not to reset the settings after having chosen 1, select
again O by pressing the I-key und return to the operation level by pres-
sing the S-key.
[Reset factory defaults: 0
=
no Reset - 1
=
Reset]
4.4. Memory and statistic functions (P2)
4.4.1. General considerations on memory functions
Force gauges series FMI-B30 and FMI-S30 and higher are able to cap-
ture and memorize measuring values either as a sequence of single
values (Single) or as continuously saved measuring cycles (Series),
which can be displayed with simple statistical functions (Maximum,
minimum, average and standard deviation).
For datatransfer via USB to a PC we recommend the software
FMI_Connect (Part no.: FMI-972). More detailed tests, displaying
larger numbers of single values, a more comprehensive analysis of
measurement results and test stand applications are possible with
the software FMI_Analyze ( Part no.: FMI-975).
idle
select menue PO
no reset
N
Mem
S
Limit
reset
S
press 2 seconds
> <
Reset factory default settings
