Alltrax SR48300, Operator'S Manual, Page: 4 / 32

4 SR OPERATORS MANUAL
Safety Notes:
When working on electric vehicles, sudden unexpected events can
occur, it’s recommended to:
• Place the drive axle on jack stands—wheels off the
floor.
• When working on wiring or batteries, always remove
rings and watches.
• Use the proper safety equipment, eye protection, and
insulated tools.
• Never connect a computer while the vehicle is being
charged.
• Disconnect batteries before installing or working on
the controller.
• Wear safety glasses.
• Because hydrogen can build up due to gassing from
the batteries, work in a well ventilated area.
• Make sure the battery pack is fused.
• Do not clean the controller with a high PSI pressure
washer.
•When cleaning batteries, take precautions to keep the
battery acid from splashing on the controller.
Note:
It is the installer’s responsibility to ensure the correct equipment
(ie. wire, motor, solenoid, fuse etc) is installed in the car.
READ AND SAVE THESE
INSTRUCTIONS
WARNINGS