Alltion AM-2000, User Manual

Page: 21 / 46

Alltion (Guangxi) Instrument Co., Ltd.
AM-2000 User’s Manual | Product Assembly
17
Installation of Cross Arm System
Upright Installation of Cross Arm
The upright installation of cross arm is applicable to mobile floor stand, fixed floor support and
low-position wall mount.
Because the cross arm is heavy and long, please install by two operators for for safety.
Loosen five fastening bolts (2)
on the cross arm, remove the
plastic cover (1) and put it aside;
Lift the cross arm over the pole, cross the power cable (3) from the mounting hole of cross
arm (4), as shown by the bellow arrow.
Install the cross arm (4) to the pole (5)
In order to install it in place, completely loosen the locking knob (6) before inserting the cross
arm into the pole.
Once the cross arm bracket is installed in place, insert the power plug into the power
connector (7) and fix the cable to the cable holder (8).
Install the plastic cover (1) on the cross arm (3), finish installation.
6
4
6
3
5
8
1
2