KEENAN
MechFiber400 Operator’s Manual
Revision G02 28
th
Sept 2020
28
Grease point 24
Primary drive chain tensioner arm pivot pin (see Figure 10a)
Grease point 25
Secondary drive chain tensioner arm pivot pin (see Figure 10a)
Grease point 26
Rotor drive chain tensioner arm pivot pin (see Figure 10a)
Grease point 27
Auger drive chain tensioner arm pivot pin (see Figure 10a)
Grease point 28
Rotor drive chain adjuster arm pivot pin (see Figure 10a)
Grease point 29
Rotor drive tensioner spring inner seat bush (see Figure 10a)
Grease point 30
Rotor drive tensioner spring outer seat bush (see Figure 10a)
Grease point 31
Rotor drive chain tensioner spring seat shaft (see Figure 10a)
Grease point 32
Auger drive chain tensioner adjuster pivot bush (see Figure 10a)
Grease point 33
Auger chain tensioner compression spring seat pivot bush (see
Figure 10a)
Grease point 34
Auger chain tensioner compression spring inner seat (see Figure
10a)
3.
VFC-door
- Check the VFC-door is able to move freely each day and grease external slides
as appropriate.
4.
PTO drive shaft
- Refer to PTO operators manual for greasing instructions and
recommendations
Figure 9: Drive system central greasing manifold
See figure 10 for details
