Alltech KEENAN MechFiber345, Operator'S Manual

Page: 12 / 82

The KEENAN MechFiber Mixer Wagon has many safety features built into its
design but ultimately, safe operation requires the vigilance of the operator and
an understanding of potential safety hazards. The machine is designed to be
used as a mixer/chopper wagon for mixing animal feeds. It should not be used
for any other purpose which will affect its performance or safety.
The following safety points are general guidelines. Given the wide variety
of possible operating conditions other safety risks may exist which are not
captured in the list over.
a) Always park the mixer wagon on level ground and apply the handbrake
when not in use.
b) Do not exceed 15 km/h (10 mph) when in use/transit. Local road traffic
laws will apply when machine is in transit on public road, on which the
maximum permissible speed is 25 km/h. Exceeding this speed will
compromise the life and safety of major components such as the hitch,
axle, wheels and chassis.
c) Ensure the VFC-door is closed and all Feed-Out Trays / Elevators are in
the closed & transport position prior to using on the public road.
d) Exercise extreme caution for possible overtaking traffic at either side
when turning.
e) Do not stand on the ladder whilst the feeder is in transit. The mixer
wagon should never be used for the transport of people, animals or
objects.
f) Do not stand between the tractor and mixer wagon while it is in use.
g) Use only a PTO shaft with a properly fitted safety guard and correct
shear bolt.
h) Always connect the PTO shaft with the shear bolt end to the machine.
The operating speed of the PTO is 540 rpm and the direction of rotation
is marked on the front cover. Always use a well maintained PTO shaft
and keep the safety covers in good condition.
i) Ensure all trailing leads, hoses, etc. are well clear of the PTO.
j) Never operate the PTO in “ground speed mode” or drive the PTO in
reverse.
k) Make sure all covers/guards are fitted and closed correctly. Never
remove guards when the mixer wagon is connected to the tractor.
l) Ensure the mixer wagon and the immediate area surrounding it is clear
of people, especially children, before commencing operation. Ensure
that there is sufficient visibility for the operator to observe all danger
zones and that the tractor is equipped with mirrors to enable the
operator to see both sides of the machine while it is in operation.
m) When connecting the tractor to the mixer wagon only connect using
the ring hitch/hitch on the mixer wagon to ensure safe coupling. Ensure
that the hitch is connected properly to the tractor and that all pins and
clips are properly installed. Then connect the PTO shaft in the correct
fashion. Connect the hydraulic hoses ensuring that the functions match
the indicated valve on the tractor.
4. Safety
4.1 Safety Instructions
12
Revision A04 July 2018